Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT AIR CONDITIONING UNIT (for LHD)
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255683 FRONT AIR CONDITIONING UNIT(for LHD) A

HEATING / AIR CONDITIONING  FRONT AIR CONDITIONING UNIT(for LHD)  REASSEMBLY  


PROCEDURE

Hide 88501 2.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

a.

Install the evaporator.


b.

Attach the 6 claws to install the unit case.


c.

Install the 7 screws.


Hide 3.INSTALL SERVO MOTOR (for Automatic Air Conditioning System)

a.

Install the rear air mix damper control servo motor LH.

i.

Attach the claw to install the lever and servo motor.


ii.

Install the 2 screws.



b.

Install the rear mode control servo motor.

i.

Attach the claw to install the plate and servo motor.


ii.

Install the 2 screws.



c.

Set the damper servo so that the cutout part engages with the tooth of the gear, and attach the claw to install the servo motor unit.


d.

Check that the pin is in the groove of the link.

E261693E03
3.104,2.427 3.104,3.323 true 2.979,2.427 2.667,3.26 true 4.563,1.854 5.427,1.573 true 4.5,1.708 5.49,1.167 true 3.198,0.844 3.646,1.135 true 3.219,0.521 3.719,1.052 true 2.875,0.719 3.167,0.906 0.292,0.188 10 false Pin 2.75,0.333 3.198,0.531 0.448,0.198 10 false Groove 5.563,1.083 5.854,1.271 0.292,0.188 10 false Pin 5.479,1.448 5.927,1.646 0.448,0.198 10 false Groove 3.031,3.354 3.323,3.542 0.292,0.188 10 false Pin 2.427,3.292 2.875,3.49 0.448,0.198 10 false Groove


e.
E154717E03
3.01,0.802 3.156,0.99 0.146,0.188 10 false 1 2.865,2.875 3.01,3.052 0.146,0.177 10 false 3 0.479,2.469 0.604,2.635 0.125,0.167 10 true 2

Install the 3 screws in the order shown in the illustration, and install the servo motor unit.


Hide 4.INSTALL SERVO MOTOR

a.

for Automatic Air Conditioning System:

Install the front air mix damper control servo motor LH.

i.

Attach the claw to install the plate and servo motor.


ii.

Install the 2 screws.



b.

Install the front mode control servo motor LH.

i.

Attach the claw to install the plate and servo motor.


ii.

Install the 2 screws.



c.

Attach the 3 claws to install the plate.


d.

Set the damper servo so that the cutout part engages with the tooth of the gear, and attach the claw to install the servo motor unit.


e.

Install the 4 screws.


Hide 5.INSTALL SERVO MOTOR

a.

for Automatic Air Conditioning System:

Install the front air mix damper control servo motor RH.

i.

Attach the claw to install the plate and servo motor.


ii.

Install the 2 screws.



b.

Install the control air bypass damper control servo motor.

i.

Attach the claw to install the plate and servo motor.


ii.

Install the 2 screws.



c.

for 4 Zone Type:

Install the front mode control servo motor RH.

i.

Attach the claw to install the plate and servo motor.


ii.

Install the 2 screws.



d.

Set the damper servo so that the cutout part engages with the tooth of the gear, and attach the claw to install the servo motor unit.


e.

Install the 4 screws.


Hide 6.INSTALL REAR AIR MIX DAMPER CONTROL SERVO MOTOR RH (for 4 Zone Type)

a.

Install the servo motor with the 3 screws.


Hide 88515 7.INSTALL COOLER EXPANSION VALVE (w/o Cool Box)

a.

Sufficiently apply compressor oil to 4 new O-rings and the fitting surface of the hose joint.

Compressor oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the cooler evaporator.


c.

Install the 2 O-rings to the air conditioner tube and accessory assembly.


d.

Install the cooler expansion valve and air conditioner tube and accessory assembly to the evaporator.


e.

Using a 4 mm hexagon wrench, install the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


f.

Install new packing.


Hide 88790E 8.INSTALL AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (w/ Cool Box)

a.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.

Compressor oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the air conditioner tube and accessory assembly.


c.

Install the air conditioner tube and accessory assembly to the evaporator.


d.

Using a 4 mm hexagon wrench, install the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


e.

Install the bracket with the screw.


Hide 88515 9.INSTALL COOLER EXPANSION VALVE (w/ Cool Box)

a.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.

Compressor oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the No. 2 connector tube.


c.

Install the No. 2 connector tube, expansion valve and No. 3 connector tube.


d.

Using a 4 mm hexagon wrench, install the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


e.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.

Compressor oil:

ND-OIL 8 or equivalent



f.

Install the 2 O-rings to the No. 1 connector tube.


g.

Install the No. 1 connector tube.


h.

Using a 4 mm hexagon wrench, install the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


i.

Using a 4 mm hexagon wrench, install the bracket with the hexagon bolt and screw.


j.

Install new butyl tape.


k.

Install new packing.


Hide 87050 10.INSTALL AIR CONDITIONING RADIATOR ASSEMBLY

a.

Install the radiator.


b.

Install the bracket with the screw.


Hide 82210K 11.INSTALL AIR CONDITIONER HARNESS

a.

Attach the clamps to install the harness.


b.

Connect the connectors.

U165840E02
2.083,2.365 2.292,2.542 0.208,0.177 10 true *A 5.729,3.052 5.938,3.229 0.208,0.177 10 false *A 5.75,2.354 5.958,2.531 0.208,0.177 10 true *A 0.563,2.99 0.771,3.167 0.208,0.177 10 false *B 1.229,1.531 1.438,1.708 0.208,0.177 10 true *B 5.302,2.021 5.51,2.198 0.208,0.177 10 true *A

Text in Illustration
*A for Automatic Air Conditioning System *B for 4 Zone Type


Hide 87710G 12.INSTALL QUICK HEATER ASSEMBLY (w/ PTC Heater)

Hide 88736A 13.INSTALL COOL BOX LIQUID TUBE (w/ Cool Box)

E112921E02
0.708,0.295 0.899,0.486 0.191,0.191 10 *a 2.264,0.304 2.454,0.481 0.191,0.177 10 *b

a.

Lubricate 2 new O-rings with compressor oil and install them to the tube.

Compressor oil:

ND-OIL 8 or equivalent


Text in Illustration
*a Correct
*b Incorrect


b.

Connect the liquid tube with the piping clamp.

NOTICE:

After connection, check the claw engagement of the piping clamp.



c.

Attach the clamp.


Hide 88897P 14.INSTALL ASPIRATOR (for Automatic Air Conditioning System)

a.

Attach the 2 claws to install the aspirator.


Hide 87201L 15.INSTALL NO. 4 AIR DUCT SUB-ASSEMBLY

a.

Install the duct with the screw.


Hide 87201M 16.INSTALL NO. 5 AIR DUCT SUB-ASSEMBLY

a.

Install the duct with the screw.


Hide 87130D 17.INSTALL BLOWER ASSEMBLY