Home › Vehicle Interior › HEATING / AIR CONDITIONING › ROOM TEMPERATURE SENSOR(for Front Side) › from 2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255690 ROOM TEMPERATURE SENSOR(for Front Side) G

HEATING / AIR CONDITIONING  ROOM TEMPERATURE SENSOR(for Front Side)  INSPECTION  


PROCEDURE

Hide 88625Q 1.INSPECT COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)

E201017E06
0.052,1.51 0.25,1.656 0.198,0.146 8 false 4.0 0.052,1.813 0.25,1.958 0.198,0.146 8 false 3.5 0.052,2.094 0.25,2.24 0.198,0.146 8 false 3.0 0.052,2.385 0.25,2.531 0.198,0.146 8 false 2.5 0.052,2.677 0.25,2.823 0.198,0.146 8 false 2.0 0.052,2.958 0.25,3.104 0.198,0.146 8 false 1.5 0.052,3.25 0.25,3.396 0.198,0.146 8 false 1.0 0.052,3.542 0.25,3.688 0.198,0.146 8 false 0.5 0.052,3.813 0.25,3.958 0.198,0.146 8 false 0.0 0.271,3.917 0.458,4.063 0.188,0.146 8 false 10 0.25,4.063 0.479,4.208 0.229,0.146 8 false (50) 0.802,3.917 0.99,4.063 0.188,0.146 8 false 20 0.75,4.063 0.969,4.208 0.219,0.146 8 false (68) 1.375,3.917 1.563,4.063 0.188,0.146 8 false 30 1.344,4.063 1.594,4.208 0.25,0.146 8 false (86) 1.958,3.917 2.146,4.063 0.188,0.146 8 false 40 1.896,4.063 2.188,4.208 0.292,0.146 8 false (104) 2.563,3.917 2.75,4.063 0.188,0.146 8 false 50 2.5,4.063 2.792,4.208 0.292,0.146 8 false (122) 3.073,3.917 3.219,4.063 0.146,0.146 8 false 60 3.021,4.063 3.313,4.208 0.292,0.146 8 false (140) 0.094,0.063 0.313,0.219 0.219,0.156 10 false *a 0.063,1.271 0.26,1.448 0.198,0.177 10 false *b 1.719,4.24 1.917,4.427 0.198,0.188 10 false *c

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
15°C (59°F) 2.45 to 2.88 kΩ
20°C (68°F) 1.95 to 2.30 kΩ
25°C (77°F) 1.60 to 1.80 kΩ
30°C (86°F) 1.28 to 1.47 kΩ
35°C (95°F) 1.00 to 1.22 kΩ
40°C (104°F) 0.80 to 1.00 kΩ
45°C (113°F) 0.65 to 0.85 kΩ
50°C (122°F) 0.50 to 0.70 kΩ
55°C (131°F) 0.44 to 0.60 kΩ
60°C (140°F) 0.36 to 0.50 kΩ


HINT:

As the temperature increases, the resistance decreases (refer to the graph).


NOTICE:
·

Touching the sensor even slightly may change the resistance value. Be sure to hold the connector of the sensor.


·

When measuring the resistance, the sensor temperature must be the same as the ambient temperature.



If the result is not as specified, replace the cooler thermistor (room temperature sensor).

Text in Illustration
*a Component without harness connected
(Cooler thermistor (Room Temperature Sensor))
*b Resistance kΩ
*c Temperature °C (°F)