87710G
1.INSPECT QUICK HEATER ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A1 - B1 | 23 to 25°C (73 to 77°F) | 0.5 to 2.5 Ω |
| A2 - B1 | 23 to 25°C (73 to 77°F) | 0.5 to 2.5 Ω |
| A2 - B2 | 23 to 25°C (73 to 77°F) | 0.5 to 2.5 Ω |
| A3 - B2 | 23 to 25°C (73 to 77°F) | 0.5 to 2.5 Ω |
If the result is not as specified, replace the quick heater assembly (PTC heater assembly).
| *a | Component without harness connected
(Quick Heater Assembly (PTC Heater Assembly) |