87120F
1.REMOVE VISCOUS HEATER RELAY
Remove the viscous heater relay from the engine room relay block.
87120F
2.INSPECT VISCOUS HEATER RELAY
Measure the resistance of the viscous heater relay.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage not applied between terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage applied to terminal 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the relay.
87120F
3.INSTALL VISCOUS HEATER RELAY
Install the viscous heater relay to the engine room relay block.