Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › from 2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255699 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  CHECK MODE PROCEDURE  


REFRIGERANT GAS VOLUME CHECK IN NORMAL OPERATION (CHECK A/C SWITCH INDICATOR AND DTC)


a.

Start the engine.


b.

Check that the "A/C" switch indicator remains on when the following conditions are met.

Measurement Condition
Item Condition
A/C Switch On
A/C operation time 15 minutes or more
Ambient temperature* 0 to 49°C (32 to 120°F)
Engine coolant temperature 45°C (113°F) or higher

*: If the ambient temperature is not within the range shown, do not perform this check.

HINT:

The A/C switch indicator and air conditioning system turn off if the amount of refrigerant in the system is insufficient.



c.

Connect the GTS to the DLC3.


d.

Check for DTC B14B8.

Result
Result Amount of Refrigerant Corrective Action
DTC B14B8 is output Empty or nearly empty Check for refrigerant leaks using a halogen leak detector and repair if necessary (See page (Click here)).
DTC B14B8 is not output Correct or insufficient Perform a refrigerant gas volume check using the GTS.



REFRIGERANT GAS VOLUME CHECK USING THE GTS


a.

Connect the GTS to the DLC3.


b.

Start the engine.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Air Conditioner / Utility / Refrigerant Gas Volume Check.


e.

According to the display on the GTS, perform the refrigerant gas volume check when the following conditions are met.

Measurement Condition
Item Condition
A/C Switch On
Ambient temperature* 0 to 49°C (32 to 120°F)
R/F switch Fresh (Ambient temperature is 31°C [87°F] or higher)
Recirculation (Ambient temperature is 30°C [86°F] or less)
Engine coolant temperature 45°C (113°F) or higher

*: If the ambient temperature is not within the range shown, do not perform this check.

HINT:
·

Refer to the GTS operator's manual for further details.

·

A message indicating the refrigerant gas volume is displayed on the GTS and the air conditioning system turns off if the amount of refrigerant in the system is insufficient.

·

DTCs are not stored when performing the refrigerant gas volume check using the GTS.



Result
Result Amount of Refrigerant Corrective Action
DTC B14B8 is output Empty or nearly empty Check for refrigerant leaks using a halogen leak detector and repair if necessary (See page (Click here)).
DTC B14B8 is not output Correct or insufficient Perform a refrigerant gas volume check using the GTS.