Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255699 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Connect the intelligent tester to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Customize Setting.


e.

Select the setting by referring to the table below.

Air Conditioner
Display Default Contents Setting Relevant ECU
Set Temperature Shift Normal Function to set the temperature shift. +2 C/+1 C/Normal/-1 C/-2 C Air conditioning amplifier assembly
Compressor/Air Inlet DEF operation Link Function to automatically turn the A/C on when the FRONT DEF button is pressed. Normal/Link Air conditioning amplifier assembly
Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. Manual/Automatic Air conditioning amplifier assembly
Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Manual/Automatic Air conditioning amplifier assembly
Foot/DEF Auto Mode ON Function to turn the airflow from FOOT/DEF on automatically when auto mode is on. ON/OFF Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the defroster is on. ON/OFF Air conditioning amplifier assembly
Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature. +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C Air conditioning amplifier assembly
Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow. ON/OFF Air conditioning amplifier assembly



CUSTOMIZING FUNCTION WITH MULTI-DISPLAY ASSEMBLY (w/ Navigation System)


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Turn the engine switch on (IG).


b.

Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Climate settings.

Air Conditioner
Display Default Contents Setting Relevant ECU
Auto A/C Mode On Enables or disables the function which automatically turns the air conditioning on according to the state of the AUTO switch. On or Off Air conditioning amplifier assembly
Efficient Ventilation Mode On Enables or disables the function which automatically switches between recirculation and fresh air modes when the AUTO switch is on. On or Off Air conditioning amplifier assembly