Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › from 2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255699 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B14B8  Refrigerant Shortage  


SYSTEM DESCRIPTION

This DTC is stored if the amount of refrigerant in the air conditioning system is insufficient.

The air conditioning amplifier assembly receives the ambient temperature signal, refrigerant pressure signal etc. from various sensors.

Based on these signals, the air conditioning amplifier assembly detects the amount of refrigerant.

The A/C switch indicator is turned off and air conditioning system is stopped if the amount of refrigerant is insufficient in the cycle.

DTC No. DTC Detection Condition Trouble Area
B14B8 When the following conditions is detected using the refrigerant shortage check in normal operation :
The amount of refrigerant is insufficient.
·

Refrigerant pipe line

·

Cooler expansion valve

·

Air conditioning amplifier assembly



CAUTION / NOTICE / HINT

HINT:

If DTC B1423/23 and B14B8 are output at the same time, troubleshoot for DTC B14B8 first.


PROCEDURE

1.CHECK FOR AIR CONDITIONING SYSTEM LEAK
a.

Install a manifold gauge set.


b.

Recover the refrigerant from the air conditioning system using a refrigerant recovery unit.


c.

Evacuate the air conditioning system and check that vacuum can be maintained in it.

OK:

Vacuum can be maintained in the air conditioning system.


HINT:

If vacuum cannot be maintained in the air conditioning system, refrigerant may be leaking from it. In this case, it is necessary to repair or replace the leaking part of the air conditioning system.




OK

2.CHARGE SYSTEM WITH REFRIGERANT

NG

7.REPAIR AIR CONDITIONING SYSTEM LEAK
2.CHARGE SYSTEM WITH REFRIGERANT
a.

Add an appropriate amount of refrigerant (See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT>REPLACEMENT).



NEXT

3.CHECK FOR DTC
3.CHECK FOR DTC
a.

Check for DTCs when the following conditions are met (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DTC CHECK / CLEAR).

Measurement Condition
Item Condition
A/C Switch On
A/C operation time 15 minutes or more
Ambient temperature* 0 to 49°C (32 to 120°F)
Engine coolant temperature 45°C (113°F) or more
Engine condition Engine running

*: If the ambient temperature is not within the range shown, do not perform this check.

OK:

DTC B14B8 is not output.




OK

END

NG

4.REPLACE COOLER EXPANSION VALVE
4.REPLACE COOLER EXPANSION VALVE
a.

Replace the cooler expansion valve with a new or known good one.


HINT:

Replace the cooler expansion valve with a new or known good one because the cooler expansion valve is either stuck or clogged.




NEXT

5.CHARGE SYSTEM WITH REFRIGERANT
5.CHARGE SYSTEM WITH REFRIGERANT
a.

Add an appropriate amount of refrigerant (See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT>REPLACEMENT).



NEXT

6.CHECK FOR DTC
6.CHECK FOR DTC
a.

Check for DTCs when the following conditions are met (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DTC CHECK / CLEAR).

Measurement Condition
Item Condition
A/C Switch On
A/C operation time 15 minutes or more
Ambient temperature* 0 to 49°C (32 to 120°F)
Engine coolant temperature 45°C (113°F) or more
Engine condition Engine running

*: If the ambient temperature is not within the range shown, do not perform this check.

OK:

DTC B14B8 is not output.




OK

END

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

7.REPAIR AIR CONDITIONING SYSTEM LEAK
a.

Identify the area where refrigerant leaks (See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT>ON-VEHICLE INSPECTION).


b.

Repair the identified area of the air conditioning system.


c.

Evacuate the air conditioning system.



NEXT

8.CHARGE SYSTEM WITH REFRIGERANT
8.CHARGE SYSTEM WITH REFRIGERANT
a.

Add an appropriate amount of refrigerant (See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT>REPLACEMENT).



NEXT

9.CHECK FOR DTC
9.CHECK FOR DTC
a.

Check for DTCs when the following conditions are met (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DTC CHECK / CLEAR).

Measurement Condition
Item Condition
A/C Switch On
A/C operation time 15 minutes or more
Ambient temperature* 0 to 49°C (32 to 120°F)
Engine coolant temperature 45°C (113°F) or more
Engine condition Engine running

*: If the ambient temperature is not within the range shown, do not perform this check.

OK:

DTC B14B8 is not output.




OK

END

NG

10.REPLACE COOLER EXPANSION VALVE
10.REPLACE COOLER EXPANSION VALVE
a.

Replace the cooler expansion valve with a new or known good one.


HINT:

Replace the cooler expansion valve with a new or known good one because the cooler expansion valve is either stuck or clogged.




NEXT

11.CHARGE SYSTEM WITH REFRIGERANT
11.CHARGE SYSTEM WITH REFRIGERANT
a.

Add an appropriate amount of refrigerant (See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT>REPLACEMENT).



NEXT

12.CHECK FOR DTC
12.CHECK FOR DTC
a.

Check for DTCs when the following conditions are met (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DTC CHECK / CLEAR).

Measurement Condition
Item Condition
A/C Switch On
A/C operation time 15 minutes or more
Ambient temperature* 0 to 49°C (32 to 120°F)
Engine coolant temperature 45°C (113°F) or more
Engine condition Engine running

*: If the ambient temperature is not within the range shown, do not perform this check.

OK:

DTC B14B8 is not output.




OK

END

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY