Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255703 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) J

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  Back-up Power Source Circuit  


DESCRIPTION

The back-up power source circuit for the air conditioning amplifier assembly is shown below. Power is supplied even after the ignition switch is turned off and is used for diagnostic trouble code memory, etc.

WIRING DIAGRAM

E179959E25
0.19,0.895 1.022,1.134 0.832,0.239 10 from Battery 3.107,1.08 3.403,1.273 0.296,0.193 10 A/C 5.187,0.805 5.389,1.016 0.202,0.211 10 21 5.458,0.903 5.885,1.068 0.426,0.165 10 +B1 4.832,1.968 5.127,2.152 0.295,0.184 10 E81 4.823,2.117 7.127,2.310 2.304,0.193 10 Air Conditioning Amplifier Assembly

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - BATTERY)
a.
U166102E01
0.123,0.082 0.307,0.251 0.184,0.170 10 *a 0.215,2.187 0.528,2.352 0.313,0.165 10 E81 2.91,3.064 3.233,3.210 0.323,0.147 10 +B1 2.75,2.673 2.956,3.025 false

Disconnect the E81 air conditioning amplifier assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
E81-21 (+B1) - Body ground Always 11 to 14 V


Text in Illustration
*a Rear view of wire harness connector
(to Air Conditioning Amplifier Assembly)



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR