55912E
1.REMOVE LOWER HEATER CONTROL BASE
As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.
Detach the 6 claws.
Remove the 3 screws and lower heater control base.
55935A
2.REMOVE CENTER CLUSTER MODULE CIRCUIT
As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.
Remove the 2 screws and center cluster module circuit.
55942A
3.REMOVE NO. 2 HEATER CONTROL GUARD
Remove the heater control guard.
| *1 | Heater Control Guard |
55905W
4.REMOVE CONTROL KNOB SUB-ASSEMBLY NO.2
Detach the 8 claws and remove the heater control knob.
55944B
5.REMOVE NO. 2 HEATER CONTROL SUPPORT PLATE