Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1UR-FE)
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255705 COMPRESSOR(for 1UR-FE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for 1UR-FE)  INSPECTION  


PROCEDURE

Hide 88410 1.INSPECT MAGNET CLUTCH ASSEMBLY

I104344E10
1.167,2 1.271,0.99 1.271,0.99 1.375,0.99 false 0.74,2.708 0.5,2.708 false 2.448,3.615 2.708,3.615 false 0.094,0.052 0.302,0.24 0.208,0.188 10 false *a 1.417,0.885 1.625,1.073 0.208,0.188 10 false *1 2.26,3.521 2.469,3.708 0.208,0.188 10 false *2 0.323,2.625 0.531,2.813 0.208,0.188 10 false *3

a.

Check the magnet clutch operation.

i.

Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.

If the operation is not as specified, replace the magnet clutch assembly.



b.

Measure the resistance.


c.

Measure the resistance between terminals 1 and 2.

Standard resistance:

65 to 125 Ω at 20°C (68°F)


Text in Illustration
*1 Magnet Clutch Rotor
*2 Battery
*3 Magnet Clutch Hub
*a Component without harness connected
(Magnet Clutch)

If the resistance is not as specified, replace the cooler compressor assembly.