Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1UR-FE)
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255705 COMPRESSOR(for 1UR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1UR-FE)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

I104342E01
3.171,0.265 3.360,0.476 0.188,0.211 10 *1 2.008,0.824 2.564,0.346 2.564,0.346 3.138,0.346 false

a.

Detach the clamp.


b.

Remove the screw and the cooler bracket.

Text in Illustration
*1 Cooler Bracket


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

I104343E01
0.572,1.508 0.865,1.648 0.293,0.140 10 SST 1.391,1.706 0.954,1.596 false

a.

Clamp the cooler compressor in a vise.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.