Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL (w/o Navigation System) › from 2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255707 AIR CONDITIONING PANEL(w/o Navigation System) A

HEATING / AIR CONDITIONING  AIR CONDITIONING PANEL(w/o Navigation System)  REASSEMBLY  


PROCEDURE

Hide 55905J 1.INSTALL CONTROL KNOB SUB-ASSEMBLY

a.

Install the control knob sub-assembly.


Hide 55942 2.INSTALL HEATER CONTROL GUARD

E330664E02
2.302,0.066 2.742,0.306 0.441,0.239 10 *1 2.267,0.126 2.096,0.126 false 2.096,0.126 2.035,0.745 false

Text in Illustration
*1 Heater Control Guard

a.

Install the heater control guard.

NOTICE:

Do not reuse the heater control guard after removing it.



Hide 55935B 3.INSTALL CENTER CLUSTER MODULE CIRCUIT

E330666

NOTICE:

As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


a.

Install new packing.


b.

Install the center cluster module circuit.


Hide 55912E 4.INSTALL LOWER HEATER CONTROL BASE

E330665

a.

Attach the 10 claws to install the lower heater control base.


b.

Install the 2 screws.


Hide 55944 5.INSTALL HEATER CONTROL SUPPORT PLATE

E330663

a.

Install the heater control support plate with the 4 screws.