Home › Vehicle Interior › POWER OUTLETS (INT) › WIRELESS CHARGING SYSTEM › from 2015.08
RM2660E _58 Vehicle Interior _052848 POWER OUTLETS (INT) _0255716 WIRELESS CHARGING SYSTEM D

POWER OUTLETS (INT)  WIRELESS CHARGING SYSTEM  SYSTEM DESCRIPTION  


WIRELESS CHARGING SYSTEM


a.

The wireless charging system allows Qi-compatible* devices to be charged without the use of a charging cable by placing them on the charging area of the mobile wireless charger cradle assembly.

HINT:

The Qi (chee) standard is an international wireless charging standard set by the Wireless Power Consortium (WPC). This is a standard for low power supply of 5 W or less for mobile devices such as smart phones and mobile batteries.



b.

Qi-compatible devices that do not fit on the charging area cannot be used. Also, depending on the Qi-compatible device, the device may not operate normally. Check the operating instructions for the Qi-compatible device to be used.


c.

The charger can be used with Qi-compatible devices.

HINT:
·

"Qi" and the "Qi" logo are registered trademarks of the Wireless Power Consortium (WPC).

·

The wireless charging system complies with the Qi standard, but compatibility with all Qi-compatible devices is not guaranteed.





INDICATOR DISPLAY


a.

The wireless charging system displays the system operation condition with an indicator.

E323514E03
2.146,1.354 2.646,0.844 2.646,0.844 3.042,0.844 false 5.656,1.417 6.083,0.719 6.083,0.719 6.427,0.719 false 1.406,1.833 0.979,1.458 0.979,1.458 0.802,1.458 false 5.885,1.833 6.333,1.438 6.333,1.438 6.5,1.438 false 1.385,1.958 0.813,1.958 false 5.885,1.948 6.49,1.948 false 0.354,0.302 0.813,0.542 0.458,0.24 10 false *A 4.031,0.323 4.438,0.51 0.406,0.188 10 false *B 0.604,1.354 0.896,1.552 0.292,0.198 10 false *a 6.542,1.354 6.792,1.531 0.25,0.177 10 false *a 0.625,1.854 0.896,2.063 0.271,0.208 10 false *b 6.542,1.865 6.771,2.063 0.229,0.198 10 false *b 3.083,0.75 3.354,0.979 0.271,0.229 10 false *c 6.469,0.635 6.729,0.813 0.26,0.177 10 false *c

Text in Illustration
*A for LHD *B for RHD
*a Wireless Charger Switch *b Indicator (Green/Amber)
*c Charging Area - -



Indicator Operation Condition
Condition Color
Not illuminated Wireless charging system off
Illuminated -
·

Wireless charging system on (idle)

·

Qi-compatible device charging complete*1


Illuminated Green
·

Qi-compatible device detected

·

Qi-compatible device charging


Illuminated (4.5 seconds)*2 Amber Charging temporarily stopped by charging stop signal from entry and start system
Blink (Pattern 1)*3 Green Open circuit in charging stop signal circuit detected
Blink (Pattern 2)*3 Amber Charge frequency change operation in progress
Blinking (Pattern 3)*3 Amber
·

Foreign object detected between Qi-compatible device and charging area

·

Gap detected between Qi-compatible device and charging area

·

Qi-compatible device positioned improperly

·

Change in Qi-compatible device position from when charging started detected


Blinking (Pattern 4)*3 Amber Abnormal rise in temperature of mobile wireless charger cradle assembly detected

*1: Even when using a Qi-compatible device, case or accessory, the indicator may fail to illuminate green when the charging is complete. In this case, check the charge condition on the device.

*2: When the charging stop signal input lasts for 4.5 seconds or less, the indicator illuminates green for 4.5 seconds.

*3: For the blinking patterns, see the figure.

E216120E08
2.604,2.396 2.271,1.948 2.271,1.948 2.052,1.948 false 3.094,2.396 3.281,2.021 3.281,2.021 3.469,2.021 false 2.844,2.396 3.198,1.75 3.198,1.75 3.573,1.75 false 2.854,4.146 2.448,3.792 2.448,3.792 2.24,3.792 false 2.594,5.844 2.292,5.563 2.292,5.563 2.135,5.563 false 3.354,0.833 3.823,0.594 3.823,0.594 4.01,0.594 false 2.771,0.833 2.365,0.615 2.365,0.615 2.146,0.615 false 3.094,4.146 2.75,3.552 2.75,3.552 2.542,3.552 false 2.854,5.844 2.552,5.281 2.552,5.281 2.396,5.281 false 3.094,0.51 3.563,0.271 3.563,0.271 3.75,0.271 false 3.844,0.156 5.219,0.354 1.375,0.198 10 false 1.0 Seconds (1 Cycle) 4.073,0.521 5.156,0.792 1.083,0.271 10 false 0.5 Seconds 1.406,1 2.281,1.208 0.875,0.208 10 false Illuminated 1.427,2.698 2.323,2.927 0.896,0.229 10 false Illuminated 1.427,4.458 2.198,4.656 0.771,0.198 10 false Illuminated 1.438,6.167 2.396,6.375 0.958,0.208 10 false Illuminated 1.177,6.563 2.292,6.813 1.115,0.25 10 false Not illuminated 1.188,4.833 2.292,5.063 1.104,0.229 10 false Not illuminated 1.198,3.094 2.375,3.333 1.177,0.24 10 false Not illuminated 1.156,1.354 2.25,1.625 1.094,0.271 10 false Not illuminated 0.104,0.573 1.323,0.813 1.219,0.24 10 false Flashing Pattern 1 0.115,2.427 1.302,2.823 1.188,0.396 10 false Flashing Pattern 2 0.083,4.146 1.271,4.49 1.188,0.344 10 false Flashing Pattern 3 0.115,5.656 1.354,5.938 1.24,0.281 10 false Flashing Pattern 4 1.344,0.521 2.427,0.792 1.083,0.271 10 false 0.5 Seconds 3.51,1.927 4.594,2.198 1.083,0.271 10 false 0.2 Seconds 3.635,1.635 4.719,1.906 1.083,0.271 10 false 0.2 Seconds 1.24,1.854 2.323,2.125 1.083,0.271 10 false 0.2 Seconds 1.438,3.708 2.521,3.979 1.083,0.271 10 false 0.2 Seconds 3.281,3.521 4.979,3.729 1.698,0.208 10 false 2.0 Seconds (1 Cycle) 1.719,3.448 2.802,3.719 1.083,0.271 10 false 0.2 Seconds 4.167,4.208 5.542,4.406 1.375,0.198 10 false 1.0 Seconds 4.385,5.906 5.844,6.104 1.458,0.198 10 false 1.0 Seconds 1.365,5.469 2.448,5.74 1.083,0.271 10 false 0.2 Seconds 1.604,5.156 2.688,5.427 1.083,0.271 10 false 0.2 Seconds 3.344,5.219 5.188,5.469 1.844,0.25 10 false 2.4 Seconds (1 Cycle) 0.083,0.031 2.927,0.281 2.844,0.25 12 false Charging Indicator Flashing Pattern:

RESUMING CHARGING


a.

After the Qi-compatible device fully charges and charging stops, if the device is left in place for 30 minutes, charging restarts.


b.

After the Qi-compatible device fully charges and charging stops, if the device is moved or repositioned within the charging area, or replaced with another Qi-compatible device within 30 minutes, charging restarts at the new position.


c.

If the Qi-compatible device is moved during charging, charging restarts at the new position.

HINT:

If consecutive recharges are performed due to the Qi-compatible device being moved, a communications error, etc., recharging should be stopped after a certain number of recharges in order to protect the device.




CHARGING STOP THAT OCCURS WHEN ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY POSITION IS DETECTED


a.

The charging frequency of the wireless charging system overlaps with the electrical wave frequency band that is used when the entry and start system detects the position of the electrical key transmitter sub-assembly. Therefore, when the electrical key transmitter sub-assembly position is being detected, the charging stop signal from the certification ECU (smart key ECU assembly) makes the wireless charging system stop charging.

HINT:
·

When charging is stopped by the charging stop signal, the indicator illuminates green.

·

If an open in the charging stop signal circuit occurs, the indicator blinkes amber (pattern 1).




b.

If any of the following conditions is met, the certification ECU (smart key ECU assembly) sends a charging stop signal.

·

A door is opened or closed.

·

The back door opener switch is pressed.

·

The back door is closed.

·

Turn the power switch on (READY).

·

The electrical key transmitter sub-assembly is outside the detection area. CHARGING




CHARGING FREQUENCY CHANGE FUNCTION


a.

If there is noise in AM radio reception during charging, turn off the power for the wireless charging system and check if the noise is reduced. If reduced, the charging frequency can be changed to reduce the noise by holding down the charging switch on the wireless charging system for approximately 1.7 seconds during charging.

HINT:

When the charging frequency is changed, the indicator blinkes amber (Pattern 2).