A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
58901A
1.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY
Attach the 2 claws.
Install the console box with the 4 bolts and 2 screws.
58903A
2.INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY
Connect the connectors and 2 clamps.
Attach the 8 claws to install the end panel.
58804A
3.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
Connect the connectors.
Attach the 14 claws to install the console panel.
58803C
4.INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
Attach the 4 claws to install the box.
58805C
5.INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Attach the 9 claws to install the panel.
55406B
6.INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Connect the connectors.
Attach the 7 claws to install the panel.
33504F
7.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Install the shift lever knob and twist it in the direction indicated by the arrow.
55402C
8.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
Attach the 7 claws to install the panel pad.
Install the screw.
Install the clip.
55448A
9.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
Attach the 7 claws to install the panel cushion.
55403C
10.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
Connect the connectors and 2 clamps.
Attach the 8 claws to install the panel pad.
Install the screw.
Install the clip.
55449C
11.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
Attach the 7 claws to install the panel cushion.