55449C
1.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
Place protective tape as shown in the illustration.
Using a moulding remover, detach the 7 claws and remove the panel cushion.
55403C
2.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
Remove the clip.
Remove the screw.
Detach the 8 claws.
Remove the panel pad and disconnect the connectors and 2 clamps.
55448A
3.REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
Place protective tape as shown in the illustration.
Using a moulding remover, detach the 7 claws and remove the panel cushion.
55402C
4.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
Remove the clip.
Remove the screw.
Detach the 7 claws and remove the panel.
33504F
5.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Twist the shift lever knob in the direction indicated by the arrow and remove it.
55406B
6.REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Detach the 7 claws.
Disconnect the connectors and remove the panel.
58805C
7.REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Detach the 9 claws and remove the panel.
58803C
8.REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
Detach the 4 claws and remove the box.
58804A
9.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
Detach the 14 claws.
Disconnect the connectors and remove the console panel.
58903A
10.REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
Place protective tape as shown in the illustration.
Using a moulding remover, detach the 8 claws.
Remove the end panel and disconnect the connectors and 2 clamps.
58901A
11.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
Remove the 4 bolts and 2 screws.
Detach the 2 claws and remove the console box.