Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING (w/o Sliding Roof) › from 2015.08
RM2660E _58 Vehicle Interior _052849 INTERIOR PANELS / TRIM _0255719 ROOF HEADLINING(w/o Sliding Roof) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(w/o Sliding Roof)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 88570D 1.REMOVE NO. 2 AIR OUTLET GRILLE ASSEMBLY (w/ Rear Air Conditioning System)

HINT:

Use the same procedure for both No. 2 air outlet grille assemblies.


a.
B182435

Detach 6 claws and remove the No. 2 air outlet grille assembly.


Hide 88570B 2.REMOVE NO. 1 AIR OUTLET GRILLE ASSEMBLY (w/ Rear Air Conditioning System)

HINT:

Use the same procedures described for the No. 2 air outlet grille.


Hide 63341 3.REMOVE NO. 1 ROOF SILENCER PAD

B185348

a.

Remove the No. 1 roof silencer pad.


Hide 63342 4.REMOVE NO. 2 ROOF SILENCER PAD

B185349

a.

Remove the No. 2 roof silencer pad.


Hide 63343 5.REMOVE NO. 3 ROOF SILENCER PAD

B185350

a.

Remove the No. 3 roof silencer pad.


Hide 63344 6.REMOVE NO. 4 ROOF SILENCER PAD

B182432

a.

Remove the No. 4 roof silencer pad.


Hide 82171 7.REMOVE NO. 1 ROOF WIRE

a.

Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.


b.

Remove the 6 pieces of tape from the roof headlining.


c.

Detach each clamp, and remove the roof wire and washer hose.


d.

Remove the double-sided tape remaining on the headlining.

B478370E01
0.479,1.479 0.792,1.677 0.313,0.198 10 false *a

Text in Illustration
*a Visor Connector - -
V100155

Tape - -