Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
55900D
1.REMOVE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Air Conditioning System)
55900
2.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Cooler)
55549C
3.REMOVE REAR COOLER SWITCH HOLE COVER (w/o Rear Cooler)
Remove the 4 screws.
Detach the 5 claws and remove the hole cover.
55548B
4.REMOVE INSTRUMENT PANEL HOLE COVER
Remove the 2 screws.
Detach the 7 claws and remove the hole cover.
58993
5.REMOVE REAR CONSOLE BOX MOUNTING BRACKET
Remove the 4 screws and bracket.
58905
6.REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Remove the 6 screws and door.
58908A
7.REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Remove the 12 screws, lower box and door lock.
58907
8.REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
Using a moulding remover, detach the 12 claws and remove the inner door.
Remove the 4 screws and door hinge.
58971
9.REMOVE CONSOLE COMPARTMENT DOOR LOCK
Remove the 2 screws and door lock.
10.REMOVE COOLING BOX ASSEMBLY
Remove the 4 screws.
Detach the 10 claws and remove the cooling box.
88650E
11.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect the connector.
Remove the screw and amplifier.
88601
12.REMOVE COOLER CONTROL SWITCH SUB-ASSEMBLY
Detach the 2 claws.
Disconnect the connector and remove the switch.
58899B
13.REMOVE NO. 2 COOLING BOX BRACKET
Remove the 2 screws and mounting bracket.
Remove the 2 screws and bracket.
58889C
14.REMOVE COOLING BOX BRACKET
Remove the 2 screws and mounting bracket.
Remove the 2 screws and bracket.
58888C
15.REMOVE COOLING BOX BASE
Remove the 10 screws and cooling box base.
88502
16.REMOVE COOLING UNIT CASE SUB-ASSEMBLY
Remove the 2 screws and air duct from the case.
88721C
17.REMOVE LIQUID HOSE
Remove the bolt and liquid hose.
Remove the O-ring from the liquid hose.
18.REMOVE LOWER COOLING UNIT CASE SUB-ASSEMBLY
Remove the screw.
Disconnect the 3 connectors.
Remove the 4 holding springs and lower cooling unit case.
19.REMOVE UPPER COOLING UNIT CASE
Remove the cooling unit case.
Detach the 2 hooks and open the case, as shown in the illustration.
88625B
20.REMOVE NO. 3 COOLER THERMISTOR
Remove the cool box insulator.
Remove the thermistor.
88306
21.REMOVE NO. 1 COOLER BLOWER MOTOR SUB-ASSEMBLY
Remove the 2 screws.
Detach the 4 claws and remove the blower motor.
88501D
22.REMOVE NO. 2 COOLER EVAPORATOR SUB-ASSEMBLY
Remove the evaporator.