Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
58812A
1.INSTALL LOWER CONSOLE BOX
Attach the 2 claws to install the lower console box.
Install the 2 screws and 4 bolts.
58804A
2.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
Attach the 8 claws to install the upper console panel sub-assembly.
33504F
3.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Install the shift lever knob and twist it in the direction indicated by the arrow.
58805C
4.INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Attach the 12 claws to install the rear upper console panel sub-assembly.
58834B
5.INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH
Attach the 8 claws to install the upper No. 2 console panel garnish.
| *A | for Separate Seat Type | *B | for Bench Seat Type |
58833B
6.INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH
Attach the 8 claws to install the upper No. 1 console panel garnish.
55406B
7.INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Connect the connectors.
Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.
55403C
8.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
Connect the connectors and attach the 2 clamps.
Attach the 8 claws to install the lower instrument panel pad sub-assembly.
Install the clip and screw.
55449C
9.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.
55402C
10.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
Attach the 7 claws to install the lower instrument panel pad sub-assembly.
Install the clip and screw.
55448A
11.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.
12.INSTALL FRONT SEAT ASSEMBLY RH