84794A
1.REMOVE DEICER RELAY
Remove the deicer relay from the engine room relay block.
84794A
2.INSPECT DEICER RELAY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage is not applied to terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Battery voltage is applied to terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the relay.
84794A
3.INSTALL DEICER RELAY
Install the deicer relay to the engine room relay block.