Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Driver Door Window Only)
RM2660E _59 Vehicle Exterior _052850 WINDOW / GLASS _0255735 POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Driver Door Window Only) J

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Driver Door Window Only)  Jam Protection Function does not Operate  


DESCRIPTION

This symptom may occur to all door windows.

The jam protection function operates within a specified range during the manual up or auto up operation.


PROCEDURE

1.PERFORM INITIALIZATION

OK

2.CHECK JAM PROTECTION FUNCTION OPERATING RANGE

NG

END (PROBLEM DUE TO INITIALIZATION FAILURE)

2.CHECK JAM PROTECTION FUNCTION OPERATING RANGE
a.

Check if the jam protection function operates for applicable power window.

HINT:

The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.157 in.) below that.


OK:

Jam protection function operates.


Result
Result Proceed to
OK A
NG (for LHD) B
NG (for RHD) C



A

END

B

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

C

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH