Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM2660E _59 Vehicle Exterior _052850 WINDOW / GLASS _0255739 WINDOW DEFOGGER WIRE G

WINDOW / GLASS  WINDOW DEFOGGER WIRE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 68132D 1.INSPECT BACK DOOR GLASS (DEFOGGER WIRE)

NOTICE:
·

When cleaning the glass, wipe the glass along the wire using a soft, dry cloth. Take care not to damage the defogger wires.

·

Do not use detergents or glass cleaners that have abrasive ingredients.

·

When measuring voltage, wrap a piece of tin foil around the tip of the negative (-) tester probe and press the foil against the wire with your finger as shown in the illustration.



B066134E35
2.729,0.792 2.729,1.5 false 1.938,1.188 1.698,1.635 false 0.406,1.063 0.406,0.552 0.406,0.552 0.708,0.552 false 2.667,1.531 2.854,1.688 0.188,0.156 10 false *1 1.583,1.667 1.771,1.823 0.188,0.156 10 false *2 0.75,0.479 0.938,0.635 0.188,0.156 10 false *3

Text in Illustration
*1 Defogger Wire
*2 Tin Foil
*3 Tester Probe

a.

Turn the ignition switch to ON.


b.

Turn the defogger switch on.


c.
B119840E03
2.333,0.594 1.271,1 false 1.052,0.896 1.26,1.083 0.208,0.188 10 false *a

B119841E03
2.25,1.052 1.844,1.896 false 0.896,0.771 1.271,0.771 1.271,0.771 1.729,1.094 false 3.073,0.094 3.125,0.094 3.125,0.094 3.125,0.938 false 2.396,0.708 2.563,0.708 2.563,0.708 2.563,0.958 false 3.26,1.615 2.719,3.042 2.719,3.042 2.438,3.042 false 1.146,0.208 1.281,0.208 1.281,0.208 1.729,0.531 false 0.917,0.125 1.083,0.323 0.167,0.198 10 false *a 0.635,0.688 0.885,1 0.25,0.313 10 false *b 2.875,0.042 3.135,0.271 0.26,0.229 10 false *c 2.198,0.625 2.438,0.844 0.24,0.219 10 false *d 1.656,1.781 1.813,2.052 0.156,0.271 10 false *e 2.25,2.948 2.427,3.125 0.177,0.177 10 false *f

Measure the voltage at the center of each defogger wire as shown in the illustration.

Standard Voltage:
Voltage Diagnosis
Approx. 5 V Wire is not broken
Approx. 10 or 0 V Wire is broken


Text in Illustration
*a Center

HINT:

If there is approximately 10 V, the wire may be faulty between the center of the wire and the wire end on the ground side. If there is no voltage, the wire may be faulty between the center of the wire and the wire end on the battery side.



d.

Place the voltmeter positive (+) lead against the defogger wire on the battery side.


e.

Place the voltmeter negative (-) lead with the foil strip against the wire on the ground side.


f.

Slide the positive (+) lead from the battery side to the ground side.


g.

The point where the voltage drops from approximately 10 V to 0 V is where the defogger wire is broken.

HINT:

If the defogger wire is not broken, the voltmeter indicates 10 V at the positive (+) end of the defogger wire and gradually decreases to approximately 0 V as the meter probe moves to the other end.


Text in Illustration
*a Ground Side
*b Foil Strip
*c Approximately 10 V
*d 0 V
*e Broken Wire
*f Battery Side