Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM › from 2015.08
RM2660E _59 Vehicle Exterior _052851 SLIDING ROOF / CONVERTIBLE _0255742 SLIDING ROOF SYSTEM U

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM  TERMINALS OF ECU  


CHECK SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (SLIDING ROOF ECU)


U155874E03
1.594,0.25 1.99,0.521 0.396,0.271 10 false R15

a.

Disconnect the R15 siding roof drive gear sub-assembly (sliding roof ECU) connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
R15-8 (B) - R15-12 (E) LA-L - W-B +B power supply Always 11 to 14 V
R15-1 (IG) - R15-12 (E) B - W-B Power supply Engine switch off Below 1 V
Engine switch on (IG) 11 to 14 V
R15-7 (OPN) - R15-12 (E) P - W-B Sliding roof motor open OPEN switch off 10 kΩ or higher
OPEN switch on Below 1 Ω
R15-5 (CLS) - R15-12 (E) G - W-B Sliding roof motor close CLOSE switch off 10 kΩ or higher
CLOSE switch on Below 1 Ω
R15-4 (UP) - R15-12 (E) R - W-B Sliding roof motor up UP switch off 10 kΩ or higher
UP switch on Below 1 Ω
R15-6 (DWN) - R15-12 (E) GR - W-B Sliding roof motor down DOWN switch off 10 kΩ or higher
DOWN switch on Below 1 Ω
R15-12 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω