Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR
RM2660E _59 Vehicle Exterior _052852 DOOR / HATCH _0255743 BACK DOOR A

DOOR / HATCH  BACK DOOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).


PROCEDURE

Hide 51099 1.INSTALL SPARE PLATE SUB-ASSEMBLY (w/ Tire Carrier)

B186201

a.

Install the plate with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 51940 2.INSTALL SPARE WHEEL CARRIER LOCK STRIKER ASSEMBLY (w/ Tire Carrier)

B186200

a.

Install the striker with the 2 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 51948 3.INSTALL SPARE WHEEL CARRIER AUXILIARY STOPPER (w/ Tire Carrier)

B186202

a.

Install the stopper with the 2 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 51930 4.INSTALL SPARE WHEEL CARRIER LOCK ASSEMBLY (w/ Tire Carrier)

B186199

a.

Attach the 4 claws to install the spare wheel carrier lock to the spare wheel carrier lock control cable.


Hide 51950 5.INSTALL SPARE WHEEL CARRIER LOCK CONTROL CABLE ASSEMBLY (w/ Tire Carrier)

B186198

a.

Install the spare wheel carrier lock control cable to the spare wheel carrier lock and attach the clamp.


b.

Close the spare wheel carrier lock cover.


c.
B186197

Install the spare wheel carrier lock control cable with the 5 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


d.

Attach the clamp.


Hide 51903B 6.INSTALL SPARE WHEEL CARRIER SUB-ASSEMBLY (w/ Tire Carrier)

a.

Clean the threaded surfaces on the vehicle body with a non-residue solvent.


b.

Apply adhesive to the threads of the 6 bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the spare wheel carrier with the 6 bolts.

Torque:
28.4 N*m (290 kgf*cm, 21 ft.*lbf)

B186196


d.

Install the spare tire.

Torque:
90 N*m (918 kgf*cm, 66 ft.*lbf)


Hide 51902A 7.INSTALL SPARE WHEEL COVER SUB-ASSEMBLY (w/ Tire Carrier)

B186195

a.

Attach the clip to install the cover.


b.

Install the 2 nuts.


Hide 51937C 8.INSTALL SPARE WHEEL CARRIER HINGE BRACKET (w/ Tire Carrier)

B186194

a.

Attach the 2 claws to install the bracket.