Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT
RM2660E _59 Vehicle Exterior _052852 DOOR / HATCH _0255745 HOOD SUPPORT N

DOOR / HATCH  HOOD SUPPORT  DISPOSAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH side and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 53450A 1.DISPOSE OF HOOD SUPPORT ASSEMBLY

a.
B184535E01
2.103,1.601 2.294,1.767 0.191,0.166 10 a 1.671,1.75 1.862,1.917 0.191,0.166 10 A 2.657,1.75 2.848,1.917 0.191,0.166 10 B 2.782,1.411 2.973,1.577 0.191,0.166 10 b

Horizontally fix the hood support in a vise with the piston-rod pulled out.


b.

Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw and gradually release the gas.

Standard Measurement:
Area Specified Condition
a 150 mm (5.91 in.)
b 20 mm (0.787 in.)


CAUTION:

As metal debris may be blown outward by the gas, you must:

·

Wear protective glasses.

·

Cover the area being cut.



NOTICE:

The gas inside the hood support is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the hood support with a piece of cloth or other material.