Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT › from 2015.08
RM2660E _59 Vehicle Exterior _052852 DOOR / HATCH _0255745 HOOD SUPPORT A

DOOR / HATCH  HOOD SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH side and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 53450A 1.REMOVE HOOD SUPPORT ASSEMBLY LH

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not push sideways on the cylinder because the rod may bend.



a.
B421438

Using a thin-bladed screwdriver with its tip wrapped in protective tape, remove the 2 stop rings along their grooves.

Text in Illustration
V100155

Protective Tape


b.

Detach the 2 ball joints and remove the hood support assembly.


c.

Remove the hood support assembly while holding the hood by hand.


Hide 53337C 2.REMOVE HOOD STAY BRACKET LH

a.
B421439

Remove the bolt.


b.

Detach the guide and remove the hood stay bracket LH.


Hide 68961 3.REMOVE HOOD STAY BOLT

a.
B433893

Remove the hood stay bolt.