Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH › 2015.08–2017.08
RM2660E _59 Vehicle Exterior _052852 DOOR / HATCH _0255749 BACK DOOR OPENER SWITCH A

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).

PROCEDURE

Hide 84840G 1.INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

a.

Connect the connector.


b.

Install the back door opener switch assembly with the 2 screws.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 84901 2.INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)

a.

Attach the 2 claws to install the door opening switch sub-assembly.


Hide 67848C 3.INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)

Hide 74611B 4.INSTALL ASSIST GRIP (for Face to Face Seat Type)