84840G
1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 (UL) - 2 (L) | Lock switch Pushed | Below 1 Ω |
| 1 (UL) - 2 (L)
3 (B) - 2 (L) |
Not pushed | 10 kΩ or higher |
| 3 (B) - 2 (L) | Open switch Pushed | Below 1 Ω |
If the result is not as specified, replace the back door opener switch assembly.
84901
2.INSPECT DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 (E) - 2 (B) | Not pushed | 10 kΩ or higher |
| 1 (E) - 2 (B) | Pushed | Below 1 Ω |