68960
1.DISPOSE OF BACK DOOR STAY ASSEMBLY LH
Horizontally fix the stay in a vise with the piston-rod pulled out.
Using a metal saw, gradually cut any area between A and B to release the gas.
| Area | Specified Condition |
|---|---|
| a | 150 mm (5.91 in.) |
| b | 20 mm (0.787 in.) |
As metal debris may be blown outward by the gas, you must:
Wear protective glasses.
Cover the area being cut.
The gas inside the hood support is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the back door stay with a piece of cloth or other material.