Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052852 DOOR / HATCH _0255750 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH side and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 68960 1.INSTALL BACK DOOR STAY ASSEMBLY LH

a.

When reusing the back door stay:

i.

Clean the threaded surface on the vehicle body with a non-residue solvent.


ii.

Apply adhesive to the threads of the 2 bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



iii.
B181318

Install the back door stay with the 2 bolts.

CAUTION:

Install the door stay while supporting the back door with one hand.


Torque:
22 N*m (224 kgf*cm, 16 ft.*lbf)


iv.

Apply adhesive to the threads of the bolt.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



v.
B184291

Install the back door stay bolt to the body.

CAUTION:

Install the door stay bolt while supporting the back door with one hand.


Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)



b.

When replacing the back door stay with a new one:

i.

Clean the threaded surface on the vehicle body with a non-residue solvent.


ii.

Apply adhesive to the threads of the bolt.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



iii.
B181317

Install the back door stay bolt to the body.

CAUTION:

Install the door stay while supporting the back door with one hand.


Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


iv.

Apply adhesive to the threads of the 2 bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



v.
B181318

Install the back door stay with the 2 bolts.

CAUTION:

Install the door stay while supporting the back door with one hand.


Torque:
22 N*m (224 kgf*cm, 16 ft.*lbf)


vi.

Connect the ball joint of the back door stay bolt to the back door stay assembly LH.


vii.

Check that the back door stay assembly does not come off.