84280D
1.INSPECT POWER BACK DOOR SENSOR ASSEMBLY LH
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1(OSL) - 2(OSLE) | Not pressed | Approximately 1 kΩ |
| Pressed | Below 100 Ω |
If the result is not as specified, replace the power back door sensor assembly LH.
| *a | Component without harness connected
(Power Back Door Sensor Assembly LH) |
| *b | Pressed |
| *c | Not Pressed |
84270G
2.INSPECT POWER BACK DOOR SENSOR ASSEMBLY RH
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1(OSR) - 2(OSRE) | Not pressed | Approximately 1 kΩ |
| Pressed | Below 100 Ω |
If the result is not as specified, replace the power back door sensor assembly RH.
| *a | Component without harness connected
(Power Back Door Sensor Assembly RH) |
| *b | Pressed |
| *c | Not Pressed |