Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER RUBBER
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255771 REAR WIPER RUBBER A

WIPER / WASHER  REAR WIPER RUBBER  INSTALLATION  


PROCEDURE

Hide 85214R 1.INSTALL REAR WIPER RUBBER

a.
E156177

Install the rear wiper rubber to the 2 rear wiper rubber backing plates.

NOTICE:

Install the backing plates in the correct direction.



b.
E156178

Insert the rear wiper rubber from the claw position of the middle of the rear wiper blade to the end.


c.
E156179

After passing the rear wiper rubber through the rear end side claw, allow it to stick out from the rear end stopper and slide it through the front tip side claw.


Hide 85242 2.INSTALL REAR WIPER BLADE

a.

Hold the wiper blade at the same angle it was removed at and attach the claw to install it.