Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER RUBBER
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255771 REAR WIPER RUBBER A

WIPER / WASHER  REAR WIPER RUBBER  REMOVAL  


PROCEDURE

Hide 85242 1.REMOVE REAR WIPER BLADE

a.
E156175E04
1.135,1.802 1.854,1.802 true 2.563,1.323 3.01,1.625 0.448,0.302 10 false 57° 0.813,1.698 1.24,1.948 0.427,0.25 10 false Claw 2.125,0.094 2.396,0.344 0.271,0.25 10 false (1) 0.229,0.052 0.5,0.302 0.271,0.25 10 false (2)

Raise the rear wiper blade to the position shown in the illustration until the meshing of the claw disengages with a clicking sound.

NOTICE:

Be careful not to break the claw.



b.

Pull the rear wiper blade straight away from the wiper arm toward the left side of the vehicle.

NOTICE:

Do not bend the rear wiper arm with the rear wiper blade removed, as the arm tip could damage the windshield surface.



Hide 85214R 2.REMOVE REAR WIPER RUBBER

a.
E156176E10
2.458,1.781 2.688,1.781 2.688,1.781 2.76,1.656 false 1.792,1.667 2.406,1.896 0.615,0.229 10 true Stopper 2.948,0.75 3.24,0.979 0.292,0.229 10 false Pull 2.583,0.177 2.969,0.406 0.385,0.229 10 false Push

Pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration and remove it.

NOTICE:

Do not pull out the wiper rubber forcibly. Otherwise, the backing plates will be deformed or the blade claw will be damaged.


HINT:

Pushing the rubber as shown in the illustration will allow it to be removed more easily.



b.

Remove the 2 wiper rubber backing plates from the wiper rubber.