Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Front Side) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255773 WASHER MOTOR(for Front Side) A

WIPER / WASHER  WASHER MOTOR(for Front Side)  REMOVAL  


PROCEDURE

Hide 76622D 1.REMOVE FRONT FENDER MUDGUARD LH

Hide 75860A 3.REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH

Hide 53876A 4.REMOVE FRONT FENDER LINER LH

a.

Remove the 2 screws.


b.

Using a T30 "TORX" socket, remove the 2 screws.


c.

Using a clip remover, remove the 2 grommets, 12 clips and fender liner.

E156166


Hide 5.DRAIN WASHER FLUID

a.
E156158

Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.


Hide 85301 6.REMOVE WASHER INLET SUB-ASSEMBLY

a.
E156159

Using a clip remover, remove the clip and washer inlet.


Hide 85330 7.REMOVE WINDSHIELD WASHER JAR ASSEMBLY

a.
E156160E03
1.396,1.26 1.615,1.354 0.219,0.094 1.396,1.26 1.615,1.354 0.219,0.094 1.01,0.25 0.792,0.25 0.792,0.25 1.302,1.125 true 1.052,0.135 2.969,0.458 1.917,0.323 10 true w/ Headlight Cleaner System

w/ Headlight Cleaner System:

i.

Detach the clamp.


ii.

Disconnect the 2 connectors.


iii.

Disconnect the headlight cleaner hose.



b.

w/o Headlight Cleaner System:

i.

Detach the clamp.


ii.

Disconnect the connector.



c.
E156161

Remove the 4 bolts. Then remove the windshield washer jar.


Hide 85310 8.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
E156157

Remove the windshield washer motor and pump assembly together with the gasket in the direction shown in the illustration.