Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR › from 2015.08
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255778 HEADLIGHT CLEANER MOTOR A

WIPER / WASHER  HEADLIGHT CLEANER MOTOR  INSTALLATION  


PROCEDURE

Hide 85280A 1.INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

a.
B407858

Connect the joint hose with the clip.


b.
E157686

Install the headlight cleaner motor and pump together with the gasket in the direction shown in the illustration.

HINT:

Make sure the gasket is positioned as shown in the illustration.



c.

Connect the connector.


Hide 4. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID

Hide 75860A 6.INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH

Hide 76622D 8.INSTALL FRONT FENDER MUDGUARD LH

Hide 9.INSTALL FRONT WHEEL LH

Torque:
for Aluminum Wheel : 131 N*m (1336 kgf*cm, 97 ft.*lbf)
for Steel Wheel : 209 N*m (2131 kgf*cm, 154 ft.*lbf)