Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER SWITCH
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255780 HEADLIGHT CLEANER SWITCH G

WIPER / WASHER  HEADLIGHT CLEANER SWITCH  INSPECTION  


PROCEDURE

Hide 84150D 1.INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY

a.
E157699E01
0.998,3.06 1.145,3.197 0.147,0.137 10 B 2.302,3.06 2.473,3.197 0.171,0.137 10 L 1.462,2.834 1.127,3.06 false 1.961,2.825 2.242,3.06 false 0.179,1.427 2.679,1.845 2.500,0.419 10 Component without harness connected: (Headlight Cleaner Switch Assembly)

Remove the headlight cleaner switch assembly.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (L) - 8 (B) on Below 1 Ω
off 10 kΩ or higher


If the result is not as specified, replace the headlight cleaner switch assembly.