Home › Vehicle Exterior › WIPER / WASHER › RAIN SENSOR › from 2015.08
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255782 RAIN SENSOR A

WIPER / WASHER  RAIN SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 89943 1.REMOVE RAIN SENSOR COVER

a.
B427840

Slide the rain sensor cover as shown in the illustration and detach the 2 guides.


b.
B408107E01
0.153,1.421 0.476,1.663 0.323,0.242 10 *a 0.354,1.516 1.001,1.627 false

Release the stopper by pulling it down.

Text in Illustration
*a Stopper
V100135

Unlock
V100136

Remove


c.

Remove the rain sensor with rain sensor cover as shown in the illustration.


d.
B407863

Detach the 2 claws and remove the rain sensor cover.


Hide 89941 2.REMOVE RAIN SENSOR

a.
B407864

Disconnect the connector and remove the rain sensor.


Hide 3.CLEAN WINDSHIELD GLASS

HINT:
·

Rain sensor tape is reusable. Only replace the rain sensor tape if it is damaged or contaminated.

·

Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.

·

If there is any rain sensor tape residue remaining on the windshield glass, replace the tape.