Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER RUBBER
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255785 FRONT WIPER RUBBER A

WIPER / WASHER  FRONT WIPER RUBBER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for both the RH and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 85214B 1.INSTALL WIPER RUBBER LH

a.
E123098

Install the 2 backing plates to the rubber.

NOTICE:

Make sure the backing plates are facing the proper direction.



b.
E156173

Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.

HINT:

Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.



c.

Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.

HINT:

Push the wiper blade into the grooves of the wiper rubber to attach if completely.



Hide 85222A 2.INSTALL FRONT WIPER BLADE LH

a.
E119837

Install the wiper blade as shown in the illustration.