Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR (for Double Swing Out Type)
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255786 REAR WIPER MOTOR(for Double Swing Out Type) G

WIPER / WASHER  REAR WIPER MOTOR(for Double Swing Out Type)  INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

a.
B283530E01
0.116,0.023 0.282,0.198 0.166,0.176 10 *a 0.684,1.827 0.803,2.003 0.120,0.176 10 E 1.087,1.827 1.281,2.003 0.194,0.176 10 B 1.514,1.827 1.731,2.003 0.217,0.176 10 L 1.113,1.3 0.758,1.817 false 1.405,1.3 1.148,1.817 false 1.737,1.3 1.571,1.817 false

Check the wiper continuous operation.

i.

Connect the positive (+) lead of the battery to terminal 4 (B), and the negative (-) lead to terminal 3 (L) and terminal 5 (E), and check that the motor operates.

OK:

Motor operates continuously.


If the result is not as specified, replace the rear wiper motor assembly.

Text in Illustration
*a Component without harness connected
(Rear Wiper Motor Assembly)



b.
B283530E02
0.116,0.023 0.282,0.198 0.166,0.176 10 *a 0.684,1.827 0.803,2.003 0.120,0.176 10 E 1.087,1.827 1.281,2.003 0.194,0.176 10 B 2.15,1.827 2.367,2.003 0.217,0.176 10 C1 1.113,1.3 0.758,1.817 false 1.405,1.3 1.148,1.817 false 2.069,1.3 2.236,1.817 false

Check the wiper intermittent operation.

i.

Connect the positive (+) lead of the battery to terminal 4 (B), and the negative (-) lead to terminal 2 (C1) and terminal 5 (E), and check that the motor operates.

OK:

Motor operates intermittently.


If the result is not as specified, replace the rear wiper motor assembly.

Text in Illustration
*a Component without harness connected
(Rear Wiper Motor Assembly)