Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR (for Double Swing Out Type)
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255786 REAR WIPER MOTOR(for Double Swing Out Type) G

WIPER / WASHER  REAR WIPER MOTOR(for Double Swing Out Type)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

a.
B283520E01
1.386,1.89 1.542,2.050 0.156,0.160 10 *1 2.595,1.873 2.751,2.033 0.156,0.160 10 A 1.575,1.981 1.816,1.981 1.816,1.981 1.921,1.796 false

Operate the rear wiper motor assembly.


b.

Stop the rear wiper motor assembly operation.


c.

Check the automatic stop position.

Standard Clearance:
Area Specified Condition
A 55 to 75 mm (2.17 to 2.95 in.)


Text in Illustration
*1 Back Door Glass Edge

HINT:

After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.