Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY (for Halogen Headlight) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255799 HEADLIGHT ASSEMBLY(for Halogen Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Halogen Headlight)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81144 1.REMOVE NO. 1 HEADLIGHT COVER (w/ Projector Headlight)

a.
E244765

Turn the No. 1 headlight cover in the direction indicated by the arrow in the illustration and remove the No. 1 headlight cover.


Hide 81134 2.REMOVE HEADLIGHT GASKET (w/ Projector Headlight)

a.

Remove the headlight gasket from the No. 1 headlight cover.


Hide 81110D 3.REMOVE NO. 2 HEADLIGHT BULB (w/ Projector Headlight)

a.
E244766

Disconnect the connector.


b.

Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb.

NOTICE:

Do not touch the glass part of the No. 2 headlight bulb.



Hide 81110B 4.REMOVE NO. 1 HEADLIGHT BULB (w/ Projector Headlight)

a.
E244767

Disconnect the connector.


b.

Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb.

NOTICE:

Do not touch the No. 1 headlight bulb glass.



Hide 81510C 5.REMOVE FRONT TURN SIGNAL LIGHT BULB (w/ Projector Headlight)

a.
E244768

Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.


b.

Remove the front turn signal light bulb from the socket.


Hide 85662 6.REMOVE HEADLIGHT LEVELING MOTOR LH (w/ Projector Headlight)

a.
E247042E01
2.357,0.029 2.544,0.210 0.187,0.181 10 (1) 1.255,0.99 1.442,1.172 0.187,0.181 10 (2) 1.857,1.574 2.044,1.755 0.187,0.181 10 (3)

Disconnect the connector.


b.

Turn the motor in the direction indicated by the arrow (1) in the illustration to disconnect it.


c.

Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to disconnect the shaft.


d.

Pull the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to remove it.


Hide 81110B 7.REMOVE NO. 1 HEADLIGHT BULB (w/o Projector Headlight)

a.
E155819

Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb.

NOTICE:

Do not touch the glass part of the No. 1 headlight bulb.



Hide 81110D 8.REMOVE NO. 2 HEADLIGHT BULB (w/o Projector Headlight)

a.
E155818

Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb.

NOTICE:

Do not touch the glass part of the No. 2 headlight bulb.



Hide 81510C 9.REMOVE FRONT TURN SIGNAL LIGHT BULB (w/o Projector Headlight)

a.
E157696

Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.


b.

Remove the front turn signal light bulb from the socket.


Hide 81610F 10.REMOVE CLEARANCE LIGHT BULB (w/o Projector Headlight)

a.
E155820

Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.


b.

Remove the clearance light bulb from the socket.


Hide 85662 11.REMOVE HEADLIGHT LEVELING MOTOR LH (w/o Projector Headlight)

a.
E155823E01
1.906,1.788 2.093,1.969 0.187,0.181 10 (1) 1.834,0.854 2.021,1.035 0.187,0.181 10 (2) 1.054,1.292 1.241,1.473 0.187,0.181 10 (3)

Disconnect the connector.


b.

Turn the motor in the direction indicated by the arrow (1) in the illustration to disconnect it.


c.

Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to disconnect the shaft.


d.

Pull the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to remove it.