81220
1.INSPECT FOG LIGHT ASSEMBLY LH
Apply battery voltage to the connector and check the light illumination condition.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → B5-2 (B)
Battery negative (-) → B5-1 (E) |
Illuminates |
If the result is not specified, replace the fog light assembly LH.
| *a | Component without harness connected
(Fog Light Assembly LH) |
81210A
2.INSPECT FOG LIGHT ASSEMBLY RH
Apply battery voltage to the connector and check the light illumination condition.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → B6-2 (B)
Battery negative (-) → B6-1 (E) |
Illuminates |
If the result is not specified, replace the fog light assembly RH.
| *a | Component without harness connected
(Fog Light Assembly RH) |