Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2015.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255802 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81550L 1.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E244784

Install the rear turn signal light bulb to the socket.


b.

Turn the socket in the direction indicated by the arrow in the illustration to install the socket.


c.

Attach the clamp.


Hide 81562A 2.INSTALL REAR COMBINATION LIGHT GASKET LH

a.

Install the rear combination light gasket LH to the rear combination light lens and body LH.


Hide 81560 3.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

a.

Connect the connector.


b.

Attach the 2 clips to install the rear combination light assembly LH.


c.

Install the 2 bolts.


d.

Attach the 6 claws and install the 2 covers.