Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255802 REAR COMBINATION LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81560 1.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

a.
E157008E01
0.179,0.191 2.649,0.602 2.470,0.411 10 Component without harness connected: (Rear Combination Light Assembly) 2.266,2.663 2.626,2.412 false 0.142,2.274 0.537,2.456 0.395,0.181 10 STOP 0.637,2.365 1.333,2.644 false 2.636,2.303 2.792,2.484 0.156,0.181 10 E

Check the stop light.

i.

Apply battery voltage to the connector, and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 4 (STOP)
Battery negative (-) → 6 (E)
Light illuminates


If the result is not as specified, replace the rear combination light assembly.



b.
E157008E02
0.107,0.084 2.619,0.464 2.512,0.380 10 Component without harness connected: (Rear Combination Light Assembly) 0.18,2.433 0.491,2.614 0.310,0.181 10 TAIL 0.552,2.534 0.939,2.565 false 2.597,2.464 2.753,2.645 0.156,0.181 10 E 2.262,2.534 2.61,2.549 false

Check the taillight.

i.

Apply battery voltage to the connector, and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 3 (TAIL)
Battery negative (-) → 6 (E)
Light illuminates


If the result is not as specified, replace the rear combination light.