Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255802 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81560 1.REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

a.
E244781E01
2.212,1.588 2.368,1.769 0.156,0.181 10 *1 2.204,1.691 1.669,1.616 false

Using a screwdriver wrapped with protective tape, detach the 6 claws and remove the 2 cover.

Text in Illustration
*1 Protective Tape


b.
E244782E01
2.186,0.015 2.342,0.197 0.156,0.181 10 *1 2.174,0.08 1.946,0.264 false

Put protective tape around the rear combination light assembly LH.

Text in Illustration
*1 Protective Tape


c.

Remove the 2 bolts.


d.

Detach the 2 clips and remove the rear combination light assembly LH.


e.

Disconnect the connector.


Hide 81562A 2.REMOVE REAR COMBINATION LIGHT GASKET LH

a.

Remove the rear combination light gasket LH from the rear combination light lens and body LH.


Hide 81550L 3.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E244783

Detach the clamp.


b.

Turn the socket in the direction indicated by the arrow in the illustration and remove the socket and rear turn signal light bulb.


c.

Remove the rear turn signal light bulb from the socket.