Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2015.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255802 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81498 1.REMOVE REAR COMBINATION LIGHT COVER LH

a.
E329132

Using moulding remover B, detach the 5 claws and remove the rear combination light cover LH.


Hide 81560 2.REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

NOTICE:

If the rear combination light assembly LH has removed, replace the rear combination light body gasket LH with a new one.


a.
E329134

Put protective tape around the rear combination light assembly LH.

Text in Illustration
V100155

Protective Tape


b.

Remove the 2 bolts.


c.

Pull the rear combination light assembly LH toward the rear of the vehicle to detach the 2 pins and 2 guides to remove it.


d.

Disconnect the connector.