Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2015.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255802 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81565A 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

a.

Attach the wire harness clamp and connector to install the rear combination light socket and wire sub-assembly LH.


Hide 81550L 2.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the bulb socket.


b.
E329140E03
2.635,1.646 2.01,1.531 false 1.948,1.438 2.958,1.052 false 1.719,4.177 2.552,4.177 false 2.667,1.563 2.854,1.74 0.188,0.177 10 false *b 2.979,0.906 3.167,1.083 0.188,0.177 10 false *a 2.583,4.063 2.771,4.24 0.188,0.177 10 false *c

Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.

Text in Illustration
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark


Hide 81564 3.INSTALL REAR COMBINATION LIGHT BODY GASKET LH

a.

Install a new rear combination light body gasket LH.