Home › Vehicle Exterior › LIGHTING (EXT) › BACK-UP LIGHT ASSEMBLY(for Standard) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255803 BACK-UP LIGHT ASSEMBLY(for Standard) G

LIGHTING (EXT)  BACK-UP LIGHT ASSEMBLY(for Standard)  INSPECTION  


PROCEDURE

Hide 81590A 1.INSPECT REAR LIGHT ASSEMBLY LH

a.
E110285E02
0.205,0 2.716,0.359 2.510,0.359 10 Component without harness connected: (Rear Light Assembly) 0.766,1.523 0.922,1.704 0.156,0.181 10 E 2.368,1.493 2.601,1.674 0.233,0.181 10 T/P 1.432,1.503 0.932,1.616 false 2.004,1.485 2.344,1.577 false

Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (T/P)
Battery negative (-) → Terminal 1 (E)
Light illuminates


If the result is not as specified, replace the rear light assembly.