Home › Vehicle Exterior › LIGHTING (EXT) › BACK-UP LIGHT ASSEMBLY(for Standard) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255803 BACK-UP LIGHT ASSEMBLY(for Standard) A

LIGHTING (EXT)  BACK-UP LIGHT ASSEMBLY(for Standard)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81590A 1.REMOVE REAR LIGHT ASSEMBLY LH

a.
E244786E01
2.178,0.993 2.334,1.174 0.156,0.181 10 *1 2.163,1.074 1.959,1.195 false

Put protective tape around the rear light assembly LH.

Text in Illustration
*1 Protective Tape


b.

Remove the 3 nuts.


c.

Detach the clip and remove the rear light assembly LH.


d.

Disconnect the connector.


Hide 81594A 2.REMOVE REAR LIGHT GASKET LH

a.

Remove the rear light gasket LH from the rear light lens and body LH.


Hide 81952E 3.REMOVE REAR LIGHT COVER

a.
E244787

Detach the 2 claws and guide and remove the rear light cover from the rear light lens and body LH.


Hide 81550N 4.REMOVE BACK UP LIGHT BULB

a.
E244788

Detach the clamp.


b.

Turn the rear light socket and wire LH in the direction indicated by the arrow in the illustration and remove the socket and back up light bulb.


c.

Remove the back up light bulb from the rear light socket and wire LH.


Hide 81595 5.REMOVE REAR LIGHT SOCKET AND WIRE LH

a.
E244789

Disconnect the connector and remove the rear light socket and wire LH from the rear light lens and body LH.