Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
for Clamp Type:
Set the headlight dimmer switch assembly onto the steering column making sure that the stopper protrusions and cutout parts align.
While loosening the band clamp, attach the claw to install the headlight dimmer switch assembly.
Connect the connector.
for Press Fit Type:
Align the 2 stoppers of the headlight dimmer switch assembly with the 2 cutouts of the steering column and set the headlight dimmer switch assembly.
|
Stopper |
|
Cutout |
Attach the claw to install the headlight dimmer switch assembly.
Connect the connector.
84650
2.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
3.INSTALL SPIRAL CABLE
Install the spiral cable (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>INSTALLATION).