Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052855 LIGHTING (EXT) _0255811 LIGHTING SYSTEM D

LIGHTING (EXT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Customize Setting.


e.

Select the setting by referring to the table below.

Main Body
Display Default Contents Setting
Lighting Time 15s To change the lighting time after closing the door. (It will quickly fade out in the case of turning the ignition switch to ON). 7.5s/15s/30s
I/L when ACC OFF ON Function to light the interior light when the ignition switch is turned from ON to off. ON/OFF
I/L ON W/Door Key Unlock ON Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON/OFF
Room Light when Aprchd ON Dome light illumination (when approaching vehicle) ON/OFF
Disp Ex ON Sen NORMAL Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*1 LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
Disp Ex OFF Sen NORMAL Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2 LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
Sensitivity NORMAL Function to adjust the ambient light sensitivity of the automatic light control system.*3 LIGHT2/LIGHT1/NORMAL/DARK1/DARK2

Light Control
Display Default Contents Setting
DRL Function ON DRL control. ON/OFF
Automatic High Beam ON Automatic high beam system ON/OFF

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


*1
E251735E13
0.635,0.635 1.635,0.906 1,0.271 10 false System Setting 0.844,1.313 1.469,1.5 0.625,0.188 10 false Setting 1.979,1.323 2.604,1.51 0.625,0.188 10 false DARK2 2.979,1.323 3.604,1.51 0.625,0.188 10 false DARK1 3.917,1.323 4.542,1.51 0.625,0.188 10 false NORMAL 4.958,1.323 5.583,1.51 0.625,0.188 10 false LIGHT1 5.958,1.323 6.583,1.51 0.625,0.188 10 false LIGHT2 6.021,0.656 6.646,0.844 0.625,0.188 10 false Light 1.958,0.667 2.583,0.854 0.625,0.188 10 false Dark

HINT:

When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.


*2
E251735E13
0.635,0.635 1.635,0.906 1,0.271 10 false System Setting 0.844,1.313 1.469,1.5 0.625,0.188 10 false Setting 1.979,1.323 2.604,1.51 0.625,0.188 10 false DARK2 2.979,1.323 3.604,1.51 0.625,0.188 10 false DARK1 3.917,1.323 4.542,1.51 0.625,0.188 10 false NORMAL 4.958,1.323 5.583,1.51 0.625,0.188 10 false LIGHT1 5.958,1.323 6.583,1.51 0.625,0.188 10 false LIGHT2 6.021,0.656 6.646,0.844 0.625,0.188 10 false Light 1.958,0.667 2.583,0.854 0.625,0.188 10 false Dark

HINT:

When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.


*3
E251735E13
0.635,0.635 1.635,0.906 1,0.271 10 false System Setting 0.844,1.313 1.469,1.5 0.625,0.188 10 false Setting 1.979,1.323 2.604,1.51 0.625,0.188 10 false DARK2 2.979,1.323 3.604,1.51 0.625,0.188 10 false DARK1 3.917,1.323 4.542,1.51 0.625,0.188 10 false NORMAL 4.958,1.323 5.583,1.51 0.625,0.188 10 false LIGHT1 5.958,1.323 6.583,1.51 0.625,0.188 10 false LIGHT2 6.021,0.656 6.646,0.844 0.625,0.188 10 false Light 1.958,0.667 2.583,0.854 0.625,0.188 10 false Dark

HINT:

When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.




CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Turn the ignition switch to ON.


b.

Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Light Settings.


c.

Select the setting by referring to the table below.

Display Default Contents Setting
Interior Lights Off Time 15 s This function controls the interior lights. OFF, 7.5 s, 15 s or 30 s
Light Sensor Sensitivity 0
(middle bar)
Adjusts the ambient light sensitivity of the automatic light control system.* -2, -1, 0, +1 or +2
Daytime Running Lights ON DRL control. ON/OFF

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


*
E251735E14
0.635,0.635 1.635,0.906 1,0.271 10 false System Setting 0.844,1.313 1.469,1.5 0.625,0.188 10 false Setting 2.188,1.333 2.813,1.521 0.625,0.188 10 false -2 3.156,1.333 3.781,1.521 0.625,0.188 10 false -1 4.188,1.323 4.813,1.51 0.625,0.188 10 false 0 5.115,1.323 5.74,1.51 0.625,0.188 10 false +1 6.104,1.333 6.427,1.521 0.323,0.188 10 false +2 6.021,0.656 6.646,0.844 0.625,0.188 10 false Light 1.958,0.667 2.583,0.854 0.625,0.188 10 false Dark

HINT:

When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.